Wednesday, November 6, 2024
Home » New Release » E-flite Inverza 280 BNF Basic

E-flite Inverza 280 BNF Basic

The E-flite® Inverza™ 280 BNF Basic is a collaborative original design by RC aerobatic world champion Quique Somenzini, full-scale aerobatic aircraft craftsman Kevin Kimball and aviation artist Mirco Pecorari. Never before has an aerobatic aircraft been developed with a more dynamic team effort. Its unique blend of performance, grace and potency offers exceptional aerobatic performance for 3D, precision or scale flight, sized for you to enjoy at a convenient park or small field. Everything about its design, from its fit and finish to its original outline, reflects exceptional attention to the needs of performance minded pilots. As soon as you open the box, its design clearly reflects what experience has been missing from the world of aerobatics.

Key Features

  • Minimal assembly and setup required
  • Hollow-molded foam construction with carbon fiber reinforcement
  • High-speed digital servos and Spektrum™ Nanolite receiver installed
  • High-power BL280, 1800Kv outrunner power system installed
  • High-performance custom propeller and matching spinner
  • Two-piece wing with easy-access attachment and carbon fiber joiner
  • Magnetic top and bottom hatches provide instant access
  • Large, double-beveled control surfaces attached with CA hinges
  • Robust wire landing gear and steerable tail wheel
  • Ready to bind to your DSM2®/DSMX® transmitter

Specs

Wingspan: 26.0 in (660mm)
Overall Length: 26.0 in (660mm)
Wing Area: 162.0 sq. in. (10.41 sq. dm.)
Flying Weight: 8.3 oz (235 g)
Motor Size: 280-size brushless outrunner (installed)
Radio: 4+ channel DSM2/DSMX transmitter
Servos: (4) 3.5 g digital servos (installed)
Trim Scheme Colors: Purple, yellow
CG (Center of Gravity): 77mm ahead of the trailing edge at wing tip
Wing Loading: 7.7 oz/sq ft (23.5 g/sq dm)
Airfoil Shape: Symmetrical
Prop Size: 6.8 x 3.5
Spinner Size: 1.18 in (30mm)
Speed Control: 10-amp brushless (installed)
Recommended Motor Battery: 11.1V 3S 450mAh LiPo
Control Throw (Ailerons): Low: 12mm up/down, 30% expo; High: 25mm up/down, 40% expo
Control Throw (Elevator): Low: 7mm up/down, 20% expo; High: 35mm up/down, 60% expo
Control Throw (Rudder): Low: 8mm right/left, 20% expo; High: 20mm right/left, 35% expo
Main Wing Tube Length: 350mm
Main Wing Tube OD: 8mm
Is Assembly Required: Yes
Assembly Time: Less than 1 Hour
Plane Type: Aerobatic & 3D
Experience Level: Intermediate
Power Plant Size: 180-280 Electric
Recommended Environment: Indoor/Outdoor
Fuel Type: Electric