Friday, August 18, 2017
Home » New Release » The ParkZone VisionAire

The ParkZone VisionAire

The ParkZone VisionAire park flyer is specifically designed for sport pilots by 3D pioneer, Quique Somenzini. Its wings are constructed of hollow Z-foam™ material that has been reinforced with carbon fiber to create structures that are stiffer and lighter than solid foam. This rigid, lightweight airframe is paired with a powerful 10-size, 1250Kv brushless motor that delivers the vertical performance you need for an exhilarating 3D flying experience.

What makes the VisionAire such a great 3D plane for sport pilots is the advanced AS3X® (Artifical Stabilization – 3-aXis) System built into its AR635 receiver. The AS3X System works behind the scenes to counter the effects of wind and turbulence, using 3-axis sensing and flight control software tuned by Quique Somenzini. If you’ve never flown 3D before, this enhanced stability will give you the confidence you need to try high alpha maneuvers like harriers, hovers, torque rolls and more.

You can adjust the amount of stability the AS3X System provides or turn it off completely, but even 3D pros will find flying with it on feels completely natural. There is no delay in control response or limits on the control throws. You’ll simply feel like you’re flying an expertly tuned model that goes right where you point it.

Wingspan: 45.0 in (1143mm)
Overall Length: 42.5 in (1088mm)
Wing Area: 539 sq. in. (34.8 sq. dm.)
Flying Weight: 43.7 oz (1240 g)
Motor Size: 10-size BL10 brushless outrunner, 1250Kv (installed)
Radio: AR635 6-channel DSMX AS3X sport receiver (installed)
Servos: (4) 13 g digital high-speed servos (installed)
Trim Scheme Colors: Blue, red
CG (center of gravity): 4.5 in (115mm) back from the leading edge of wing at wing root
Wing Loading: 11.7 oz/sq. ft. (35 g/sq. dm.)
Prop Size: 12 x 4
Spinner Size: 1.57 in (40mm)
Speed Control : 40-Amp Lite Pro Switch-Mode BEC Brushless (installed)
Recommended Battery: 11.1V 3S 2200mAh 25C Li-Po (included)
Control Throw (Ailerons): Low: 70% up/down, 15% expo; High: 100% up/down, 25% expo
Control Throw (Elevator): Low: 70% up/down, 15% expo; High: 100% up/down, 20% expo
Control Throw (Rudder): Low: 70% right/left, 10% expo; High: 100% right/left, 15% expo
Approx. Flying Duration: 6 minutes
Charger: 2-3 cell DC Li-Po balancing charger
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes