Blue Flash, A Glow Powered .25-.40 Size Sport Flyer

Blue Flash Materials List And Cutting Guide

The July 2007 issue of Fly RC contains a free pull out plan for the Blue Flash, a glow powered .25-.40 size sport flyer.

The classic lines are augmented with traditional balsa construction, along with a modern airfoil and flaps for fun at the field. The following materials list and this downloadable cutting guide (PDF format) will help your plans building efforts. Please contact editors@flyrc.com with any questions.

I did not itemize the materials or components used as I built my original prototypes. The following is an attempt to list what is needed to build this model. Go over the plans, this list and the cutting guide to determine what else you might need. I recommend buying extra balsa to have on hand in case you need to make extra parts, and to ensure adequate material quality and sufficient supply while building.
—Thayer

WOOD
All stock is balsa unless otherwise noted

Qty                                    Description
6    1/16 x 3 x 36                Wing and fuselage sheeting, shear webs, rib cap strips
2    3/32 x 3 x 36                wing ribs, fuselage sheeting
4    1/8 x 4 x 36*                formers, fuselage sides and doublers
2    3/16 x 4 x 36                tail surfaces, wing tips and leading edge
1    1/2 x 36 triangle            bracing
1    1/4 x 36 triangle            bracing
2    1-3/4 x 36 T.E. stock   ailerons and flaps
2    1/2 x 1/4 x 36               rear spar
1    1/16 x 4 x 6 ply            servo plates, LE & TE joiners
1    1/8 x 6 x 9 ply              wing joiner, F2A & F2B formers,
1    1/4 x 6 x 6 ply              F1 Firewall and wing attach plate

*3-inch wide stock can be used with splicing. See cutting guide and plans to help choose.

HARDWARE
Dubro .40 tailwheel bracket, #375
Dubro 3/4-inch tailwheel, #75TW
Dubro nylon hinges, #117
Dubro control horns, #105
Goldberg 2-inch snap on spinner, #138
Great Planes .40 Dural Landing Gear, #GPMQ1820
Great Planes 1/8 x 1-1/4 Bolt On Axle, #GPMQ4275
Hayes AS-40 short engine mount, #016
Sullivan 3-inch Skylite wheels, #S877
Sullivan 6-ounce slant tank, #S438
The prototype used Sullivan #S503 Gold-N-Rod pushrods throughout.